Sampler

Sampler

Renoise has a strong focus on samples as instruments and at the heart of this is a powerful built-in Sampler to aid you in creating and sculpting brand new sounds. An instrument may contain any number of samples and these are always listed in the Sample List section on the left. The main central section of the Sampler is split into five different parts, each devoted to a different aspect of sample-based instrument construction.

Keyzones allow different samples to be triggered over a variety of notes and velocity ranges. The Waveform editor displays the samples so you can edit them with provided tools and see the results graphically. Adding Modulation and Effects to samples expands the possibilities of their sound beyond the original audio. Finally, with the Phrase Editor you can use an instrument's samples to compose any number of musical phrases that will be played on specific notes.

New sounds can be recorded directly into the Sampler from external sources, or created by hand with the simple Draw tool. Any changes made to samples using the Sample Editor are exclusive to the samples within that particular Renoise song. The source samples are never modified unless you explicitly save and overwrite the file by saving it in the Disk Browser. Besides being non-destructive to the sample files the Sampler also supports endless undo/redo-ing of all your actions.

Sample List

Located at the left, this section provides a list of the instrument's samples and is always accessible no matter what central section you're working with, so you can switch between different samples whenever you wish. To select a sample, left-click on it in the list. This will also show the name, waveform and assigned Modulation/FX sets of the sample at the bottom.

Controls

• - Delete sample from the list.

• - Insert a new blank sample into the list.

• - When enabled will automatically select a sample from the list when it is played on the keyboard or by a MIDI device.

• - Opens the Keyzones editor. Note that the Keyzone range of each sample in the list is displayed to the right of it.

• - Play the current sample with its preview options (set in the Waveform editor).

• - Opens the Waveform editor and displays the currently selected sample.

• - Assigns a Modulation set to the current sample. Pressing Edit will open the Modulation editor.

• - Assigns an FX set to the current sample. Pressing Edit will open the Effects editor.

Sample Properties

Directly under the Sample List, the properties of the currently selected sample are displayed. The arrow button at the top right toggles the opening and closing of this section.

Options

• Volume: The sample playback volume.
• Panning: The panning of the sample.

• Transpose: Transpose note playback in semi-tonal increments.
• Finetune: Fine-tuning of the Transpose value.
• Beatsync: When enabled, the sample's pitch will be automatically changed so that it lasts for the stated amount of pattern lines and is especially useful for syncing drumbeat loops. It will also automatically update its pitch if the song changes BPM. As a consequence though, the sample is 'locked' and you will be unable to use it at other pitches. As an alternative, you can leave the tickbox disabled and instead press the "T" button, which will automatically set the Transpose and Finetuning values to match the current BPM, leaving you free to change them and play the sample at other pitches.

• Trigger:
• Mute Group:
• NNA: New Note Action. When a note is in the process of playing and a new note is played in the same column, NNA dictates how the previous note will behave. By default, notes in the same column will "Cut" each other off, meaning the previous note will stop its playback, instantly silencing it. Using "Note-Off" will also stop the previous note, but any Note-Off samples assigned via the Keyzone editor are still played. To achieve polyphony you normally just use multiple columns, but by setting the NNA to "Continue" you can create the sustained playback of multiple notes using just one column.

• Playback
  • Autofade: Automatically inserts a quick fade at the beginning and end of a sample. Useful for preventing unwanted audio clicks.
  • Autoseek: During song playback, a sample is normally only heard once it has been triggered by reaching its position in the pattern. Enabling Autoseek allows the sample can be heard at any point during song playback without the need for triggering. Highly recommended for vocals, background ambience and other lengthy recorded audio.

• Interpolate: The quality at which the sample is re-sampled when generating notes different from the original pitch. "Cubic" is a very good default interpolation setting which results in the best real-time sound quality. "Linear" sounds rougher when playing a sample at a lower pitch. By turning the interpolation "Off", samples will sound a bit more metallic and rough, which can be useful if that's the kind of sound you're after. "Off" can also sound good when using very short looped samples as wave-table generators. When rendering songs as WAV files, you will have the choice of another interpolation mode: "Sinc". This method is the best quality re-sampling method, but is very, very slow and so cannot be used for real-time playback. When selecting "Sinc", only "Cubic" interpolated samples will be replaced with "Sinc". Samples with "Linear" and "Off" interpolations will use those original modes.

Track Selector

This option always stays open at the bottom right of the interface while working in the Sampler, Plugin and MIDI tabs, allowing you to select a track to play sounds on without having to move back to the Pattern Editor.