Sampler Modulation

Modulation

Adding modulation to samples greatly expands the possibilities of their sound beyond the original audio. The modulation is created by inserting devices into an interactive chain, constructing an envelope. Separate envelopes are used to modulate five basic properties of a sample. These five envelopes are collected together as a Set, which can be used to affect any number of samples simultaneously.

Modulated samples are processed polyphonically (each instance of a sound is generated independently).

The interface is split into three sections. At the upper-left is the Set list, the large section to right shows the selected property's envelope, and the lower section contains the property selector and device chain.

The Set List

A Set is a collection of five modulation envelopes, one for each sample property. Any number of Sets can be created and each instrument has its own unique Set list. The individual samples of an instrument can be assigned any one of its Sets, allowing different samples be affected by modulation in different ways. A Set can also be assigned to multiple samples simultaneously and any changes made to a Set will affect all linked samples.

The Set assigned to the current sample is marked with a circle at the list's left. Clicking on an empty circle slot will assign that Set to the sample. Clicking on a Set's name will select it for editing, while double-clicking allows you to rename it. Sets can be added or removed using the buttons at the bottom left:

• - Inserts a blank Set below the currently selected Set.
• - Deletes the currently selected Set.

Right-clicking on a Set will select it and open a context menu with additional options:

• Cut All Devices: Cut all of the Set's devices.
• Copy All Devices: Copy all of the Set's devices.
• Paste All Devices: Paste all of a previously copied Set's devices (overwrites the selected Set).
• Delete All Devices: Delete all of the Set's devices.

• Load: Loads in a Set (overwrites the selected Set).
• Save As: Saves the currently selected Set.

Sets can also be loaded and saved as presets using the menu located at the top right corner:

Creating Modulation Sets

The bottom section of the Modulation interface is dedicated to the creation of envelopes for five basic properties of a sample: Volume, Panning, Pitch, as well as the Cutoff and Resonance of an added filter (they will be unavailable until a filter is chosen from the drop-down menu). Each property has its own Input slider, which is used to adjust the starting value of the envelope.

The envelope is constructed by inserting modulation devices, creating an interactive chain. To add a device from the list, either double-click on it or drag and drop it into the chain at the desired position. Immediately before every device are a set of four buttons which change how the envelope will be altered by the output value of that device: Add, Subtract, Multiply and Divide. As changes are made to the device chain, the envelope graphic will show the results in real-time.

Modulation Devices

Note that the name of a device will change to reflect the property it is modulating.

Common Device Layout and Controls

Each modulation device has a standard set of buttons to perform common functions:

• - Remove the device from the chain.
• - Minimize/maximize the device.
• - Move the device to the left or right. Right-click to move to the start or end of the chain.
• - Enable/disable the device.

• - Toggle synchronizing the device to milliseconds or beats. Not present on all devices.
• - Toggle values to bipolar (positive and negative) or unipolar (only positive).

AHDSR

The AHDSR device is an envelope whose five properties alter its shape over time.

• Attack: How quickly the value rises up from zero.
• Hold: The value is held for this length of time before falling.
• Decay: How long it takes for the value to decrease to the percentage level set by Sustain.
• Sustain: The value will be sustained at this level until a Note-Off (key release) event.
• Release: How long it takes for the value to fall to zero.

Envelope

This device is a heavily customisable envelope with additional Sustain and Release properties.

The main graphical section of this device displays the envelope and the points used to create it. Left-clicking on a point will select it and click-dragging will move it around. Using "Left Ctrl" will display the current value of a point and also lock it in place horizontally, allowing you to fine-tune its value vertically. Double-clicking in the envelope will create a new point, while double-clicking on an existing point will remove it. For more advanced editing options, see the Using The Envelope Device section.

The following options are directly under the envelope graphic, from left to right:

• Time: The selected point's location in time.
• Value: The value of the selected point.
• Envelope Type: Dictates how the envelope's value will change over time.
  • Points: Only changes value when a point is encountered.
  • Linear: Interpolates between points in a linear fashion.
  • Curve: Interpolates with a smooth cubic curve, easing into and out of points.
• Length: Length of the envelope.

These are the options found on the right side of the device:

• Ext. Editor: This will open the envelope graphic in the large central section of the Modulation interface, allowing for finer control over details and access to additional tools. For more details, see the Using The Envelope Device section.
• Loop
  • Forward: Loop playback from start to end.
  • Reverse: Loop playback from end to start once the end point is reached.
  • PingPong: Loop playback from start to end to start to end etc.
• Sustain: When enabled, a Sustain line will appear in the envelope and can be moved by dragging the top tab. When playback reaches the Sustain line, it will be held there until a Note-Off (key release) event.
• Release: Changes how long it takes for the volume to fall to silence after a Note-Off (key release) event. Higher values equal less time. Only available for the Volume envelope.
• Presets: Store and recall your favourite envelope settings. Right-clicking will store a preset, while left-clicking will restore a previously stored preset.

Fader

A configurable fader used to create a variety of fade in/outs.

• Scaling: The scaling that will be applied to the fade. The default is linear, but you can also select from two exponential and two logarithmic scales.
• From: The starting value.
• To: The ending value.
• Duration: The length of time the fade will last.
• Delay: The start of fade will be delayed by this amount of time.

Key Tracking

This device alters its output value by responding to the key values of notes. The full output value range of 0 to 1 is scaled to fit within the min/max range.

• Min: Minimum key value.
• Min: Maximum key value.

LFO

The LFO device constantly cycles its output value in a pattern that is constructed by its properties.

• Mode:
  • - Sine wave oscillator.
  • - Sawtooth oscillator.
  • - Pulse oscillator.
  • - Random oscillator.

• Frequency: The speed of the oscillation.
• Amplitude: The maximum range that the value will oscillate to.
• Dephase: Changes which part of the oscillation cycle that the output will start at.
• Delay: The start of oscillation will be delayed by this amount of time.

Operand

A simple value output device. The "Input" slider at the beginning of the chain is also an Operand device.

• Value: The value which will be output.

Velocity Tracking

This device alters its output value by responding to the velocity values of notes.

• Mode
  • Clamp: Note values played outside of the min/max range will be clamped at the min/max values.
  • Scale: The entire velocity range is scaled to fit within this device's min/max range.
• Min: The minimum output value.
• Max: The maximum output value.

Right-click Context Menu

Right-clicking on a device will select it and open a context menu with additional options:

• Cut: Cut the device.
• Copy: Copy the device.
• Paste: Paste the previously copied device after the selected device.

• Delete: Delete the device.
• Rename: Rename the device.

• Bypass/Activate: Enable/disable the device.

• Copy Settings: Copy the parameter settings from the device.
• Paste Settings: Paste the previously copied settings into the selected device. Note that settings cannot be pasted between different types of devices.
• Init Settings: Reset the device settings to their default values.

• Modulation Set: The options function exactly as they do in the Set List, with the addition of:
  • Append: Paste a previously copied Set's device chains onto the end of the existing chains.

• Min/Maximize All: Min/maximizes all devices in the Set.

Using The Envelope Device

Pressing the "Ext. Editor" button will open the envelope graphic in the large central section of the Modulation interface, allowing for finer control over details and access to additional tools. Clicking either the top right "X" or "Ext. Editor" button will remove the larger editor.

Using the mousewheel on the envelope will zoom in/out. Left-clicking on a point will select it and click-dragging will move it around. Holding "Left Shift" while moving a point will remove all other points that it touches. Using "Left Ctrl" will display the current value of a point and also lock it in place horizontally, allowing you to fine-tune its value vertically. Double-clicking in the envelope will create a new point, while double-clicking on an existing point will remove it. Left-click-dragging across the envelope will create a highlighted area and select any points contained within, allowing them to be adjusted all at once.

Processing Controls And Options

• Draw: Draw mode allows you to draw points on the envelope with the mouse.
• Time: The selected point's location in time.
• Snap to Grid: Will snap the horizontal creation and movement of points to the current resolution of the grid.
• Value: The value of the selected point. Left-click to enter a new value.
• Snap to Value: Will vertically snap points to values of 1/divisor (the divisor is set in the value box).
• Envelope Type: Dictates how the envelope's value will change over time.
  • Points: Only changes value when a point is encountered.
  • Linear: Interpolates between points in a linear fashion.
  • Curve: Interpolates with a smooth cubic curve, easing into and out of points.
• Length: Length of the envelope.

• - Cut the whole envelope.
• - Copy the whole envelope.
• - Paste the whole envelope.

• - Move the envelope or selected points to the left/right. Will wrap around the edges.
• - Flip the envelope or selected points horizontally/vertically.
• - Humanizes the envelope or selected area by randomly adding or subtracting a small amount to the point values.

• - Opens the envelope editor in a completely separate window, which can be moved around and resized. There is also an additional maximize button at the window's top right corner. Clicking "Attach" will reattach the window to the main interface.

Right-click Context Menu

• Cut: Cut the points contained within the selection area.
• Copy: Copy the points contained within the selection area.
• Paste: Paste the previously copied points into the envelope from the cursor position (left-clicking in the envelope will set the cursor position for pasting operations).
• Paste Continuously: Paste the previously copied points into the envelope from the cursor position and repeat until the end of the envelope.
• Insert Paste: Paste the previously copied points into the envelope from the cursor position and move the rest of the envelope to right. Note that this will not affect the length of the envelope and so any points shifted outside of it will be lost.

• Cut Selected Time: Cut the selected area.
• Delete Envelope: Delete the whole envelope.

• Process: Applies to the entire envelope or the selected area if there is one.
  • Create Random Points: Creates points of random value.
  • Create Exponential Curve: Creates an exponential curve rising from 0 to 1. Use the flip buttons to achieve other curves.
  • Create Linear Curve: Creates a linear curve rising from 0 to 1.
  • Create Sine Curve: Creates a single cycle sine curve.