Sampler Modulation

Modulation

Adding modulation to samples greatly expands the possibilities of their sound beyond the original audio. To achieve this, various devices are chained together to create a modulation envelope. Separate envelopes are used to affect five basic properties of a sample: Volume, Panning, Pitch, and the Cutoff and Resonance of an added filter. These five envelopes are collected together as a Set. Any number of Sets can be created and each instrument has its own unique Set list.

The individual samples of an instrument can be assigned any one of its Sets, allowing different samples be affected by modulation in different ways. A Set can also be assigned to multiple samples simultaneously and any changes made to a Set will affect all linked samples.

Modulated samples are processed polyphonically (each instance of a sound is generated independently).

The interface is split into three sections. At the upper-left is the Set list Load & Save and the large section to right graphically shows the results of the device chain. The lower section contains the properties selector and device chain.

Modulation Devices

List on left. Name of device reflects property affected.

Common Effect Layout and Controls

Each effect that you add to the chain has a standard set of buttons to perform common functions:

• 

• - Remove the device from the chain.
• File:3.0 device-minimize.png - Minimize the device.
• - Move device to left/right. Right-click to move to start/end of chain.
• - Enable/disable device.

• - Toggle sync to milliseconds/beats. Not present on all devices.
• - Toggle bipolar/unipolar.

AHDSR

Envelope

Fader

Key Tracking

LFO

Operand

Velocity Tracking